TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
6.
Type the User name and Password in the Hyper Terminal window, the factory default value for
both of them is admin. The DOS prompt" TP-LINK>" will appear after pressing the Enter
button as figure1-5 shown. It indicates that you can use the CLI now.
1.1.2 Logon by Telnet
To log on to the switch by a Telnet connection, please take the following steps:
1.
Make sure the switch and the PC are in the same LAN.
2.
Click Start → Run to open the Run window.
Figure 1-4 Port Settings
Figure 1-5 Log in the Switch
6