Chapter 6 Vlan-Vpn Commands; Vlan-Vpn Enable; Vlan-Vpn Tpid - TP-Link TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit l2 managed switch
Hide thumbs
Also See for TL-SL5428E:
- Reference manual (341 pages) ,
- Cli reference manual (320 pages) ,
- User manual (307 pages)
Table of Contents
Advertisement
TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
Chapter 6
VLAN-VPN (Virtual Private Network) function, the implement of a simple and flexible Layer 2 VPN
technology, allows the packets with VLAN tags of private networks to be encapsulated with VLAN
tags of public networks at the network access terminal of the Internet Service Provider. And these
packets will be transmitted with double-tag across the public networks.
vlan-vpn enable
Description
The vlan-vpn enable command is used to enable the VLAN-VPN function
globally. To disable the VLAN-VPN function, please use the no vlan-vpn
enable command.
Syntax
vlan-vpn enable
no vlan-vpn enable
Command Mode
Global Configuration Mode
Example
Enable the VLAN-VPN function globally:
TP-LINK(config)# vlan-vpn enable
vlan-vpn tpid
Description
The vlan-vpn tpid command is used to configure Global TPID of the
VLAN-VPN. To restore to the default value, please use the no vlan-vpn tpid
command.
Syntax
vlan-vpn tpid tpid
no vlan-vpn tpid
Parameter
tpid —— Global TPID. It must be 4 Hex integers. By default, it is 8100.
VLAN-VPN Commands
28
Advertisement
Table of Contents
