Switchport Voice-Vlan Mode - TP-Link TL-SL5428E Cli Reference Manual

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
voice-vlan oui add mac-addr mask mask-addr [description]
voice-vlan oui remove mac-addr
Parameter
mac-addr —— The OUI address of the voice device.
mask-addr —— The OUI address mask of the voice device.
description ——Give a description to the OUI for identification which contains 16
characters at most. By default, it is empty.
Command Mode
Global Configuration Mode
Example
Create a Voice VLAN OUI descripted as TP-LINK Phone with the MAC address
00:01:E3:00:00:01 and the mask address FF:FF:FF:00:00:00. Andthen delete
the Voice VLAN OUI with the MAC address 00:00:00:11:00:01:
TP-LINK(config)#
FF:FF:FF:00:00:00 "TP-LINK Phone"
TP-LINK(config)# voice-vlan oui remove 00:00:00:11:00:01

switchport voice-vlan mode

Description
The switchport voice-vlan mode command is used to configure the Voice
VLAN mode for the Ethernet port.
Syntax
switchport voice-vlan mode { manual | auto }
Parameter
manual / auto —— Port mode.
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Configure Ethernet port 2 to operate in the manual voice VLAN mode:
TP-LINK(config)# interface Ethernet 2
voice-vlan oui add
36
00:01:E3:00:00:01 mask