Acl Bind To-Port - TP-Link TL-SL5428E Cli Reference Manual

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
vlan-id —— The VLAN ID of Redirect. The data packets those match the
corresponding ACL will be forwarded in the specific VLAN. The VLAN ID ranges
from 1 to 4094.
dscp —— DSCP of QoS Remark. Specify the DSCP region for the data
packets those match the corresponding ACL. DSCP ranges from 0 to 63. By
default, it is not limited.
local-pri —— Local Priority of QoS Remark. Specify the local priority for the
data packets those match the corresponding ACL. Local Priority ranges form 0
to 3.
mirror —— The Mirror Port of Stream Mirror, ranging form 1 to 28. By default, it
is 1.
Command Mode
Global Configuration Mode
Example
Create a Policy named policy1. For the data packets those match ACL 120 in
the policy, if the rate beyond 1000kbps, will be discarded by the switch:
TP-LINK(config)# acl policy policy-add policy1
TP-LINK(config)# acl policy action-add policy1 120 rate 1000 osd discard

acl bind to-port

Description
The acl bind to-port command is used to bind a policy to a port. To cancel the
bind relation, please use no acl bind to-port command.
Syntax
acl bind to-port {policy-name} {port}
no acl bind to-port {policy-name} {port}
Parameter
policy-name —— The name of the policy desired to bind.
port —— The number of the port desired to bind, ranging from 1 to 28.
Command Mode
Global Configuration Mode
Example
Bind policy1 to Port 1:
145