TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
Interface Configuration Mode(interface ethernet / interface range ethernet)
Example
Enable multicast filtering function for port 5, specify Action Mode as accept,
bound IP-range 2, 3, 4, and specify the maximum number of multicast groups
for port 5 to join in as 128:
TP-LINK(config)# interface Ethernet 5
TP-LINK(config-if)# igmp filter state enable mode accept addr-id 2-4
maxgroup 128
show igmp global-config
Description
The show igmp global-config command is used to display the global
configuration of IGMP.
Syntax
show igmp global-config
Command Mode
Any Configuration Mode
Example
Display the global configuration of IGMP:
TP-LINK> show igmp global-config
show igmp port-config
Description
The show igmp port-config command is used to display the port configuration
of IGMP.
Syntax
show igmp port-config [port]
Parameter
port —— The port selected to display the configuration, ranging from 1 to 28.
By default, the configuration of all ports is displayed.
Command Mode
Any Configuration Mode
167