Link-Aggregation Hash-Algorithm; Description - TP-Link TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit l2 managed switch
Hide thumbs
Also See for TL-SL5428E:
- Reference manual (341 pages) ,
- Cli reference manual (320 pages) ,
- User manual (307 pages)
Table of Contents
Advertisement
TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
link-aggregation hash-algorithm
Description
The link-aggregation hash-algorithm command is used to configure the
Aggregate Arithmetic for LAG.
Syntax
link-aggregation hash-algorithm {src_dst_mac | src_dst_ip }
Parameter
src_dst_mac —— The source and destination MAC addresses.
src_dst_ip ——The source and destination IP addresses.
Command Mode
Global Configuration Mode
Example
Configure the Aggregate Arithmetic for LAG as src_dst_mac:
TP-LINK(config)# link-aggregation hash-algorithm src_dst_mac
description
Description
The description command is used to set a description for an aggregation
group.To remove the description of an aggregation group, please use no
description command.
Syntax
description description
no description
Parameter
description——The description of LAG, which contains 16 characters at most.
Command Mode
Interface Configuration Mode（interface link-aggregation）
Example
Set the description "movie server" for aggregation group1:
45
Advertisement
Table of Contents
