TP-Link TL-SL5428E Cli Reference Manual page 21

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
The following table gives detailed information about the Accessing path, Prompt of each mode and
how to exit the current mode and access the next mode.
Mode
Primary mode once it is
connected
User EXEC
switch.
Mode
Use
command to enter this
mode from User EXEC
Privileged
mode.
EXEC Mode
Use
command to enter this
mode from Privileged
Global
EXEC mode.
Configuration
Mode
Accessing
Path
with the
TP-LINK>
the enable
TP-LINK#
the configure
TP-LINK(config)#
Logout or Access the next
Prompt
Use the exit command to disconnect the
switch
connected through the Console port).
Use the enable command to access
Privileged EXEC mode.
Use the exit command to disconnect the
switch
connected through the Console port).
Enter the disable command to return to
User EXEC mode.
Enter configure command to access
Global Configuration mode.
Use the exit or the end command or
press Ctrl+Z to return to Privileged
EXEC mode.
Use the
command
Configuration mode.
Use the vlan database to access VLAN
Configuration mode.
9
mode
(except that the switch
(except that the switch
interface type number
to access interface
is
is