Igmp Multi-Vlan-Config - TP-Link TL-SL5428E Cli Reference Manual

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
seconds. By default, it is 260.
leave-time —— Leave Time, which is the interval between the switch reveiving
a leave message from a host and the switch removing the host from the
multicast groups. Leave Time ranges from 1 to 30 in seconds. By default, it is 1.
router-port —— Static Router Port, which is mainly used in the network with
stable topology. It ranges from 1 to 28.
Command Mode
Global Configuration Mode
Example
Modify Router Port Time as 300 seconds, Member Port Time as 200 seconds,
and Leave time as 15 seconds for VLAN 1:
TP-LINK(config)# igmp vlan-config 1 rtime 300 mtime 200 ltime 15

igmp multi-vlan-config

Description
The igmp multi-vlan-config command is used to create Multicast VLAN. To
delete
multi-vlan-config command.
Syntax
igmp multi-vlan-config { disable | enable } {vid} [rtime router-time] [mtime
member-time] [ltime leave-time] [rport router-port]
no igmp multi-vlan-config
Parameter
disable | enable
vid —— The ID of the VLAN desired to modify configuration, ranging from 2 to
4094.
router-time —— Router Port Time. Within this time, if the switch does not
receive IGMP query message from the router port, it will consider this port is not
a router port any more. Router Port Time ranges from 60 to 600 in seconds. By
default, it is 300.
member-time —— Member Port Time. Within this time, if the switch does not
receive IGMP report message from the member port, it will consider this port is
not a member port any more. Member Port Time ranges from 60 to 600 in
seconds. By default, it is 260.
the corresponding
—— Enable/ Disable Multicast VLAN.
163
Multicast VLAN, please use no igmp