Cluster Manage Member-Add; Cluster Manage Role-Change - TP-Link TL-SL5428E Cli Reference Manual

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
Command Mode
Global Configuration Mode
Example
Specify the Hold Time and Interval Time of cluster c1 as 50 seconds:
TP-LINK(config)# cluster manage config c1 50 50

cluster manage member-add

Description
The cluster manage member-add command is used to add member switch. To
delete the corresponding member, please use no cluster manage
member-add command. The add/delete operations of member switches should
be implemented by the commander switch.
Syntax
cluster manage member-add {member-mac}
no cluster manage member-add {member-mac}
Parameter
member-mac —— The MAC address of the member switch desired to join in
the cluster.
Command Mode
Global Configuration Mode
Example
Add switch whose MAC address is 00:74:5D:61:67:48 to the cluster:
TP-LINK(config)# cluster manage member-add 00:74:5D:61:67:48

cluster manage role-change

Description
The cluster manage role-change command is used to change the role of the
current switch. According to their status and functions, switches in the cluster
play different roles. You can specify the role the switch plays appropriate to your
needs. A commander switch can recognize and manage the devices in the
cluster; a member switch is managed by the commander; a candidate switch
does not belong to any cluster through it can be added to a cluster; an individual
switch is with the cluster feature disabled.
193