Show Interface Counters; Show Storm-Control Ethernet - TP-Link TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit l2 managed switch
Hide thumbs
Also See for TL-SL5428E:
- Reference manual (341 pages) ,
- Cli reference manual (320 pages) ,
- User manual (307 pages)
Table of Contents
Advertisement
TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
show interface counters
Description
The show interface counters command is used to display the statistic
information of an Ethernet port.
Syntax
show interface counters { Ethernet [interface] }
Parameter
Interface ——The port selected to display the statistic information. By default,
the statistic information of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the statistic information of Ethernet port3:
TP-LINK(config)# show interface counters Ethernet 3
show storm-control Ethernet
Description
The show storm-control Ethernet command is used to display the
storm-control information of an Ethernet port.
Syntax
show storm-control Ethernet [port]
Parameter
port —— The port-number of the port selected to display the storm-control
information. It ranges from 1 to 28. By default, the storm-control information of
all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the storm-control information of all Ethernet ports:
TP-LINK(config)# show storm-control Ethernet
128
Advertisement
Table of Contents
