TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
no radius accounting secondary-ip
Parameter
ip-addr ——The IP address of the alternate accounting server. By default, it is
0.0.0.0.
Command Mode
Global Configuration Mode
Example
Configure the IP address of the alternate accounting server as 10.20.1.101:
TP-LINK(config)# radius accounting secondary-ip 10.20.1.101
radius accounting port
Description
The radius accounting port command is used to set the UDP port of
accounting server(s). To restore to the default value, please use no radius
accounting port.
Syntax
radius accounting port port-num
no radius accounting port
Parameter
port-num ——The UDP port of accounting server(s) ranging from 1 to 65535.
The default port is 1813.
Command Mode
Global Configuration Mode
Example
Set the UDP port of accounting server(s) as 1816:
TP-LINK(config)# radius accounting port 1816
radius accounting key
Description
90