Show Cluster Ntdp Port-Status; Show Cluster Ntdp Device; Show Cluster Manage Config - TP-Link TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit l2 managed switch
Hide thumbs
Also See for TL-SL5428E:
- Reference manual (341 pages) ,
- Cli reference manual (320 pages) ,
- User manual (307 pages)
Table of Contents
Advertisement
TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
TP-LINK> show cluster ntdp global
show cluster ntdp port-status
Description
The show cluster ntdp port-status command is used to display NTDP
configuration of the certain port.
Syntax
show cluster ntdp port-status [port]
Parameter
port —— The port selected to display the configuration of NTDP, ranging from
1 to 28. By default, the configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the NTDP configuration of port 2:
TP-LINK> show cluster ntdp port-status 2
show cluster ntdp device
Description
The show cluster ntdp device command is used to display the device table of
NTDP.
Syntax
show cluster ntdp device
Command Mode
Any Configuration Mode
Example
Display the device table of NTDP:
TP-LINK> show cluster ntdp device
show cluster manage config
Description
196
Advertisement
Table of Contents
