CHAPTER 8
Installation Overview for the J-SRX210
Services Gateway
Installation Overview for the J-SRX210 Services Gateway
This chapter includes the following topic:
Installation Overview for the J-SRX210 Services Gateway on page 53
After you have prepared your installation site, you are ready to unpack and install the
services gateway. It is important to proceed through the installation process as shown
in Table 23 on page 53.
Table 23: Installation Process Order for the J-SRX210 Services Gateway
Step
Task
1
Review the safety guidelines
explained.
2
Verify that you have prepared your
site for the installation of the services
gateway using the checklist.
3
Unpack the services gateway and
verify that the parts are received.
4
Prepare the services gateway for
installation.
5
Install the services gateway.
6
Connect cables to external devices.
7
Connect the grounding cables.
For more information, see
"J-SRX210 Services Gateway General
Safety Guidelines and Warnings" on
page 121
"Site Preparation Checklist for the
J-SRX210 Services Gateway" on
page 45
"Unpacking the J-SRX210 Services
Gateway" on page 57
"Preparing the J-SRX210 Services
Gateway for Rack-Mount,
Desk-Mount, and Wall-Mount
Installation" on page 61
"J-SRX210 Services Gateway
Installation" on page 65
"Connecting and Organizing Interface
Cables to the J-SRX210 Services
Gateway" on page 76
"Grounding the J-SRX210 Services
Gateway" on page 77
53