Performing Initial Software Configuration On The J-Srx210 Services Gateway Using The J-Web Interface - Dell PowerConnect J-SRX210 Hardware Manual

PowerConnect J-SRX210 Services Gateway Hardware Guide
Related Topics
Performing Initial Software Configuration on the J-SRX210 Services Gateway Using
the J-Web Interface
96
}
interfaces {
ge-0/0/0 {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
}
lo0 {
unit 0 {
family inet {
address 172.16.1.24/32;
}
}
}
}
Commit the configuration to activate it on the device.
18.
[edit]
admin@# commit
Optionally, configure additional properties by adding the necessary configuration
19.
statements. Then commit the changes to activate them on the device.
[edit]
admin@host# commit
When you have finished configuring the device, exit configuration mode.
20.
[edit]
admin@host# exit
admin@host>
Connecting a J-SRX210 Services Gateway to the CLI Locally on page 85
Connecting a J-SRX210 Services Gateway to the CLI Remotely on page 86
J-SRX210 Services Gateway Software Configuration Overview on page 91
Performing Initial Software Configuration on the J-SRX210 Services Gateway Using
J-Web Interface on page 96
J-SRX210 Services Gateway Secure Web Access Overview on page 101
This topic includes the following sections:
Establishing Basic Connectivity on page 97
Configuring Basic System Properties on page 98