Related Topics
RJ-11 Connector Pinouts for the J-SRX210 Services Gateway with Integrated
Convergence Services FXO and FXS Ports
Appendix C: J-SRX210 Services Gateway Interface Cable Specifications and Connector Pinouts
Figure 28: Console Cable Connector
Table 49 on page 149 describes the RJ-45 connector pinouts for the console port.
Table 49: RJ-45 Connector Pinouts for Services Gateway Console Port
Pin
1
2
3
4
5
6
7
8
Interface Cable and Wire Specifications for the J-SRX210 Services Gateway on page 147
RJ-45 Connector Pinouts for the J-SRX210 Services Gateway Ethernet Port on page 148
RJ-45 Connector Pinouts for the J-SRX210 Services Gateway Console Port on page 148
J-SRX210 Services Gateway Front Panel and Back Panel Views on page 9
The FXO and FXS ports use an RJ-11 cable.
Table 50 on page 149 describes the RJ-11 connector pinouts.
Table 50: RJ-11 Connector Pinouts
Pin
1
2
3
Signal
RTS
DTR
TXD
Ground
Ground
RXD
DSR/DCD
CTS
Signal
No connect
No connect
RJ P –Ring
Description
Request to Send
Data Terminal Ready
Transmit Data
Signal Ground
Signal Ground
Receive Data
Data Set Ready
Clear to Send
149