Table of Contents
Advertisement
CHAPTER 17
Maintaining the J-SRX210 Services
Gateway Hardware Components
Maintaining the J-SRX210 Services Gateway Hardware Components
This chapter describes how to maintain the hardware components of the J-SRX210
Services Gateway. This chapter includes the following topic:
Maintaining the J-SRX210 Services Gateway Hardware Components on page 105
Table 40 on page 105 describes the common tasks to maintain the hardware components
of the services gateway.
Table 40: Maintenance Procedures for the Services Gateway Hardware
Components
Maintenance
Procedures
Description
Routine Maintenance
To maintain optimum performance of the services gateway, you should
Procedures
regularly perform the following preventive maintenance procedures:
Inspect the installation site for moisture, loose wires or cables, and
excessive dust.
Make sure that airflow is unobstructed around the device and into the
air intake vents.
Check the Status LED on the front panel of the device and on the
Mini-Physical Interface Module (Mini-PIM) you are using.
Maintaining the
The services gateway cooling system works to maintain an optimal
Cooling System
temperature for the device. If the fan controller fails, the device
temperature will exceed the maximum working temperature and the
device will fail. Ensure that you maintain the recommended clearances
behind the device to enable the cooling system to function optimally.
105
Advertisement
Table of Contents
