APPENDIX C
J-SRX100 Services Gateway Interface
Cable Specifications and Connector
Pinouts
Interface Cable and Wire Specifications for the J-SRX100 Services Gateway
Related
Documentation
RJ-45 Connector Pinouts for the J-SRX100 Services Gateway Ethernet Port
This appendix includes the following sections:
Interface Cable and Wire Specifications for the J-SRX100 Services Gateway on page 127
RJ-45 Connector Pinouts for the J-SRX100 Services Gateway Ethernet Port on page 127
RJ-45 Connector Pinouts for the J-SRX100 Services Gateway Console Port on page 128
Table 36 on page 127 lists the specifications for the cables that connect to ports.
Table 36: Cable and Wire Specifications for Ports
Port
Cable Specification
Console
RS-232 (EIA-232) serial
port
cable
Ethernet
CAT-5e (Category 5)
port
cable or equivalent
suitable for 100BASE-T
operation
RJ-45 Connector Pinouts for the J-SRX100 Services Gateway Ethernet Port on page 127
RJ-45 Connector Pinouts for the J-SRX100 Services Gateway Console Port on page 128
J-SRX100 Services Gateway Front Panel and Back Panel Views on page 9
Figure 20 on page 128 shows the RJ-45 cable connector pinouts for Ethernet ports.
Maximum
Cable/Wire Required
Length
One 6-ft (1.83-m) length
6 ft (1.83 m)
with DB-9/RJ-45
connectors
One 15-ft (4.57-m)
328 ft (100
length with RJ-45/RJ-45
m)
connectors
Device
Receptacle
RJ-45
RJ-45
127