Canon imagePROGRAF iPF720 User Manual page 74

Control Panel
Paper Size Basis
Noz. Check Freq.
Sleep Timer
Length Unit
Time Zone
Date Format
Date & Time
Language
Contrast Adj.
Reset PaprSetngs
Erase HDD Data
60 Printer Parts
Setting Item
Sht Selection 1
Sht Selection 2
Date
Time
Description, Instructions
If sheet size detection is activated, choose whether ISO A3+
or 13"x19"(Super B) is applied when an intermediate size is
detected.
If sheet size detection is activated, choose whether ISO B1
or 28"x40" (ANSI F) is applied when an intermediate size is
detected.
Specify the timing for automatic checks of nozzle clogging.
Choose 1 page to check once per printed page. Choose 10
pages to check once per ten printed pages. Choose Automatic
to have the printer automatically adjust the timing for checks
based on the frequency of nozzle use.
Specify the period before the printer enters sleep mode.
Choose the unit of measurement when roll length is displayed.
You can switch the unit displayed for Roll Length Set and the
remaining paper amount displayed in the submenu.
Specify the time zone. Time zone options indicate a main city in
this time zone and the difference from Greenwich Mean Time.
Specify the date format.
Set the current date.
Set the current time. Available only if the Date setting is
specied.
Specify the language used on the Display Screen.
Adjust the Display Screen contrast level.
Restores settings that you have changed with Media
Conguration Tool to the default values.
For hard disk formatting operations.