Handling Sheets; Select�Ng The Paper Source - Canon imagePROGRAF iPF720 User Manual

Large format printer

Hide thumbs Also See for imagePROGRAF iPF720:

Table of Contents

Handling sheets

Selecting the Paper Source

When advancing paper, press the Feeder Selection button and select the source.

You can determine the selected source by checking which lamp is lit-either the Roll Media lamp (a) or the

Cut Sheet lamp (b).

Roll Media lamp : Selected when printing on Roll Media.

Cut Sheet lamp : Selected when printing on Sheets.

If any paper is loaded that will not be used, a message is shown on the Display Screen, either Remove

roll? or Eject sheet? when you press the Feeder Selection button.

When removing the paper, press the OK button.

You cannot switch the paper source in the following situations:

If the Message lamp is ashing

Check the message on the Display Screen and take action as necessary. (→P.575)

If the Data lamp is ashing

Select the paper source after printing.

If a printer menu operation is in progress

Select the paper source after the menu operation.

When in the process of loading paper

Finish loading the paper before selecting the paper source.

When in the process of replacing Ink Tanks

Finish replacing the Ink Tanks before selecting the paper source.

If the Top Cover is open

Close the Top Cover before selecting the paper source.

Handling sheets

Handling Paper 131

Table of Contents