Canon imagePROGRAF iPF720 User Manual page 130

Handling rolls
5.
Holding the paper on both sides, pull the jammed portion out toward the front. Use a scissors
to cut away the printed or wrinkled portion.
Caution
•
When cutting paper, be careful to avoid injury and damaging the printer.
6.
If the Carriage is on the left, move the Carriage to the right until it stops.
Important
•
Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may
occur when you turn on the printer.
7.
Pull the roll edge gently and align it with the Paper Alignment Line (a). Lower the Release
Lever toward the front.
Important
•
Do not force the roll paper into alignment with the Paper Alignment Line (a). This may prevent the
paper from being advanced straight.
•
The amount of paper pulled from the roll corresponds to the margin of the leading edge.
116 Handling Paper