Removing Rolls From The Roll Holder Slot; Removing A Roll From The Roll Holder - Canon imagePROGRAF iPF720 User Manual

Handling rolls

Removing Rolls From the Roll Holder Slot

Remove rolls from the Roll Holder Slot as follows.
Make sure the roll is away from the Paper Feed Slot, and then remove the Roll Holder from the Roll Holder Slot.

Removing a Roll from the Roll Holder

1.
Lift the Holder Stopper lever (a) from the shaft side to unlock it. Holding the Holder Stopper at
the position indicated (b), remove it from the Roll Holder.
2.
Remove the roll from the Roll Holder.
Important
•
After removal, store the roll in the original bag or box, away from high temperature, humidity, and
direct sunlight. If paper is not stored properly, the printing surface may become scratched, which
may affect the printing quality when you use it again.
114 Handling Paper