Hp-Gl/2 Printing Takes A Long Time - Canon imagePROGRAF iPF720 User Manual

HP-GL/2 problems
HP-GL/2 jobs are printed 6 mm larger than specied
The page size of the HP-GL/2 print job, as created in
the source application, is incorrect.
HP-GL/2 jobs are printed at maximum size, even if a
standard size is specied
The page size of the HP-GL/2 print job, as created in
the source application, is incorrect.

HP-GL/2 printing takes a long time.

Large print jobs with a lot of data take longer to print. On the printer Control Panel, set Input Resolution to
The printer stops when printing a HP-GL/2 job (the
carriage stops moving)
The printer is analyzing the print job.
570 Troubleshooting
Cause
Cause
Cause
Cause
Corrective Action
In MAIN MENU, set PageSizeProcess1 to On.
(→P.50)
Corrective Action
In MAIN MENU, set PageSizeProcess2 or
Conserve Paper to On.
The layout will be changed to the optimal layout.
(→P.50)
Corrective Action
300dpi.
(→P.50)
Corrective Action
Either wait a while for printing to resume, or on
the printer Control Panel, set Input Resolution to
300dpi.
(→P.50)