Canon imagePROGRAF iPF605 User Manual page 479

2.
Press the Menu button to display MAIN MENU.
3.
Press ▲ or ▼ to select Adjust Printer, and then press the ► button.
4.
Press ▲ or ▼ to select Adjust Length, and then press the ► button.
5.
Press ▲ or ▼ to select Yes, and then press the OK button.
A test pattern is printed for adjustment based on the amount of paper stretching or shrinkage.
The scale bar shows "Millimeter" in 50 mm units and "Inch" in 1 inch units.
6.
Measure the length of the adjustment pattern. Calculate the difference between the measured
length and actual length. Enter it as a percentage and press the OK button.
You can adjust the value in 0.02 0ncrements. Press ▲ to increase the value and ▼ to decrease it.
If the scale is printed shorter than actual size, set the value toward the positive side; if it is printed
longer, set the value toward the negative side.
Note
•
You can also specify the adjustment value by selecting Paper Details → Adjust Length.
Adjusting the feed amount
Adjustments for Better Print Quality 465