Canon imagePROGRAF iPF605 User Manual page 93

Print area Normal size
Borderless printing (*2)
Oversized (*2), (*3)
Supported width for borderless printing
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide.
(→P.101)
*2: Printing may not be possible in some cases, depending on the type and size of paper.
*3: Load paper at least 6 mm (0.24 in) wider and 6 mm higher than the size selected in Page Size for roll
paper. Or, load paper at least 26 mm (1.0 in) higher for the tray.
*4: Borderless printing requires the Spacer for Borderless Printing.
Printable area
•
Sheets ( Top Paper Feed Slot )
Top: 3 mm (0.12 in); bottom: 3 or 23 mm (0.9 in); left
and right sides: 3 mm.
•
Sheets ( Front Paper Feed Slot )
3 mm (0.12 in) on top, 23 mm (0.9 in) on bottom, and 3
mm (0.12 in) on both sides
•
Rolls
3 mm (0.12 in) from each side
For information on the recommended print area, see "Print
Area". (→P.81)
Printable area (rolls)
Entire surface
Printable area
Entire surface
10 inches (254 mm), JIS B4 (257 mm), A3+ (329 mm), 14
inches (356 mm), 16 inches (407 mm), ISO A2/A3 (420
mm) (*4), 17 inches (432 mm), JIS B2/B3 (515 mm), ISO
A1/A2 (594 mm) (*4), 24 inches (610 mm)
Printer Specications
Printer Parts 79