Sheet Printing Is Selected; Manual Printing Is Selected, But A Roll Is Loaded - Canon imagePROGRAF iPF605 User Manual

Messages regarding paper

Sheet printing is selected.

You have attempted to print a test print sheet or other
printer status information on a sheet, but no sheet
is loaded.

Manual printing is selected, but a roll is loaded.

A print job for manually printing on sheets was sent
when a roll is loaded.
Wrong paper feed slot for this paper type.
The Paper Feed Slot where paper is loaded does not
match the Paper Feed Slot specied as the paper
source.
Cannot feed paper.
The paper has come out of the printer.
A paper jam has occurred.
542 Error Message
Cause
Cause
Cause
Cause
Corrective Action
Load a sheet and try printing again.
To print on a roll instead, hold the Stop button for
more than a second to cancel printing, load a roll,
and then print.
(→P.85)
Corrective Action
Hold down the Stop button for a second or more to
cancel printing.
If there is a printed document in the output tray, select
Paper Cutting in the printer menu and cut the roll at
the desired position.
(→P.128)
Load paper of the type and size you have specied in
the printer driver and try printing again.
(→P.90)
Hold down the Stop button for a second or more to
cancel printing. Change the printer driver settings to
match the roll already loaded, and then try printing
again.
Corrective Action
Try printing again after changing the settings in the
printer driver so that the Paper Feed Slot where paper
is loaded matches the Paper Feed Slot specied as
the paper source.
(→P.90)
Corrective Action
Remove the paper, press the Load/Eject button, and
reload the paper.
Press the Load/Eject button, remove the jammed
paper, and reload paper.
If the error occurs again, turn off the printer and wait
a while before restoring power.