Banding In Different Colors Occurs - Canon imagePROGRAF iPF605 User Manual

Problems with the printing quality

Banding in different colors occurs

The roll is not loaded correctly in the Roll Feed Unit.
The paper feed amount is not adjusted correctly.
Printing does not proceed smoothly because print
jobs are interrupted during transmission.
In the printer menu, Print Length is specied in
Feed Priority.
The Printhead is out of alignment.
Streaks may occur if you set the Print Quality too
low.
522 Troubleshooting
Cause Corrective Action
Remove the roll and reload it.
(→P.114)
Adjust the feed amount.
(→P.458)
Exit other applications and cancel other print jobs.
To adjust the feed amount, specify Band Joint in
Feed Priority in the printer menu.
(→P.458)
Adjust the Printhead alignment.
(→P.453)
Choose a higher level of Print Quality in the
Advanced Settings of the printer driver and try
printing again.
(→P.193)