Handling rolls
•
If the paper is jammed by the Ejection Guide
Remove the jammed paper from the Output Tray.
After removing the paper, make sure there are no other scraps of paper in the printer.
4.
Press OK.
If paper is jammed deep in the Paper Feed Slot, remove the Roll Feed Unit and clear the paper jam as follows.
1.
Turn off the printer and remove the Roll Feed Unit from the printer. (→P.139)
2.
Remove the jammed paper from the Paper Feed Slot.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Install the Roll Feed Unit on the printer again. (→P.140)
122 Handling Paper
Need help?
Do you have a question about the imagePROGRAF iPF605 and is the answer not in the manual?
Questions and answers