Canon imagePROGRAF iPF605 User Manual page 77

Setting Item
Paper Size Basis Sht Selection
Roll Selection 1
Roll Selection 2
TrimEdge Reload
Noz. Check Freq.
Sleep Timer
Length Unit
Time Zone
Date Format
Date & Time Date
Time
Language
Contrast Adj.
Reset PaprSetngs
Description, Instructions
If sheet size detection is activated, choose whether ISO A3+
or 13"x19"(Super B) is applied when an intermediate size is
detected.
If roll size detection is activated, choose whether ISO
A3 (297mm) or 300mm Roll is applied when a roll of an
intermediate width is detected.
If roll size detection is activated, choose whether 10in. (254mm)
or JIS B4 (257mm) is applied when a roll of an intermediate
width is detected.
Choose On to cut the leading edge of the roll.
Specify the timing for automatic checks of nozzle clogging.
Choose 1 page to check once per printed page. Choose 10
pages to check once per ten printed pages. Choose Automatic
to have the printer automatically adjust the timing for checks
based on the frequency of nozzle use.
Specify the period before the printer enters Sleep mode.
Choose the unit of measurement when roll length is displayed.
You can switch the unit displayed for Roll Length Set and the
remaining paper amount displayed in the submenu.
Specify the time zone. Time zone options indicate a main city in
this time zone and the difference from Greenwich Mean Time.
Specify the date format.
Set the current date.
Set the current time.
Specify the language used on the Display Screen.
Adjust the Display Screen contrast level.
Restores settings that you have changed with Media
Conguration Tool to the factory default values.
Control Panel
Printer Parts 63