Roll Holder Set; Ieee 1394 Expansion Board - Canon imagePROGRAF iPF605 User Manual

Roll Holder Set

A set of parts including a Roll Holder, Holder Stopper (for 2- and 3-inch paper cores), 3-Inch Paper Core
Attachment, and Spacer for Borderless Printing (used for both 2- and 3-inch paper cores).
To load a roll with a 3-inch paper core, insert the 3-Inch Paper Core Attachment on the Roll Holder and attach
the Holder Stopper for 3-inch paper cores. If you use an A1 (594 mm [23.4 in]) roll or A2 (420 mm [16.5 in])
roll for borderless printing, insert the Spacer for Borderless Printing on the Roll Holder.
•
Roll Holder Set RH2-24
•
Roll Holder
•
Holder Stopper (for 2- and 3-inch paper cores (a) and (b))
•
3-Inch Paper Core Attachment
•
Spacer for Borderless Printing
For instructions on installing these parts, see "Attaching Accessories to the Roll Holder". (→P.136)

IEEE 1394 Expansion Board

An interface board to add an IEEE 1394 (also called "FireWire") port.
•
IEEE1394 Expansion Board EB-05
For instructions on installing the IEEE 1394 expansion board, refer to the documentation provided with the
optional IEEE 1394 expansion board.
Optional accessories
Printer Parts 75