Canon imagePROGRAF iPF605 User Manual page 456

Network Setting (Windows)
•
If you have selected NDS PServer: Queue Server Mode (Using an NDS Print Server)
1.
In Tree Name and Context Name, enter the tree and context name of the print server.
2.
In Print Server Name, enter the name of the print server created in "Specifying NetWare
Print Services. (→P.438)"
3.
In Print Server Password, enter the password of the print server created in "Specifying
NetWare Print Services. (→P.438)"
4.
In Polling Interval, specify the interval at which the printer checks the NetWare print queue.
•
If you have selected NPrinter: Remote Printer Mode (Using a NDS Print Server)
1.
In Print Server Name, enter the advertising name of the print server created in "Specifying
NetWare Print Services. (→P.438)" Usually, the advertising name is the same as the name of
the print server.
2.
In Printer Number, enter the same printer number specied in "Specifying NetWare Print
Services. (→P.438)"
11.
Click OK to display the Network page.
12.
Click Reset to activate the settings.
For a list of NetWare protocol settings items, see "Conguring the Printer's NetWare Network Settings".
(→P.425)
Note
•
If you use RemoteUI to display the print log in RPrinter or NPrinter mode, the document and user
information cannot be obtained. Thus, Document Name only indicates Unknown, and the User Name
information is identied as RPRINTER/NPRINTER.
442 Network Setting