The Roll Is Empty; Roll Printing Is Selected, But Sheets Are Loaded - Canon imagePROGRAF iPF605 User Manual

Roll printing is selected, but sheets are loaded.

A print job for rolls was received when a sheet is
loaded.

The roll is empty.

The roll is empty.
Roll feed unit err
The Roll Feed Unit is not working.
No Roll Feed Unit.
The printer has received a print job that species
rolls, but the Roll Feed Unit is not installed.
Cause
Cause
Cause
Cause
Corrective Action
Press the OK button and remove the sheet.
(→P.150)
Load a roll and try printing again.
(→P.115)
Hold down the Stop button for a second or more to
cancel printing.
Corrective Action
Follow these steps below to replace the used roll with
a new roll of the same type and size.
1.
Remove the roll.
(→P.117)
(→P.118)
(→P.119)
2.
Load the new roll.
(→P.112)
(→P.114)
(→P.115)
3.
If no barcode was printed on the roll, specify the
type of paper.
(→P.110)
4.
If no barcode was printed on the roll, specify the
paper length.
(→P.111)
Corrective Action
Turn off the printer, remove the Roll Feed Unit
momentarily, and then reinstall it.
(→P.139)
(→P.140)
If the message is still displayed after you do this,
contact your Canon dealer for assistance.
Corrective Action
Install the Roll Feed Unit and resend the print job.
(→P.140)
Messages regarding paper
Error Message 541