Disabling And Enabling A Switch; How To Disable A Switch; How To Enable A Switch; Disabling And Enabling A Port - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Enter the switchShow command to verify the switch state is now online.

Disabling and enabling a switch

By default, the switch is enabled after power is applied and diagnostics and switch initialization routines
have finished. You can disable and re-enable it as necessary.

How to disable a switch

1. Connect to the switch and log in as admin.
2. Enter the switchDisable command at the command line.
All Fibre Channel ports on the switch are taken offline. If the switch was part of a fabric, the fabric
reconfigures.

How to enable a switch

Connect to the switch and log in as admin.
1.
2. Enter the switchEnable command at the command line.
All Fibre Channel ports that passed the POST test are enabled. If the switch has interswitch links to a fabric,
it joins the fabric.

Disabling and enabling a port

All licensed ports are enabled by default. You can disable and re-enable them as necessary. Ports that you
activate with Ports on Demand must be enabled explicitly, as described in
on page 42.
CAUTION: The fabric will be reconfigured if the port you are enabling or disabling is connected to
another switch.
The switch whose port has been disabled will be segmented from the fabric and all traffic flowing between
it and the fabric will be lost.

How to disable a port

1. Connect to the switch and log in as admin.
HP StorageWorks 4/16 SAN Switch and 4/8 SAN Switch, SAN Switch 2/8V, SAN
2.
Switch 2/16V, SAN Switch 2/32, SAN Switch 4/32, 4/64 SAN Switch, 4/32B SAN
Switch and 400 MP Router: Enter the following command:
switch:admin> portdisable portnumber
portnumber
where
HP StorageWorks SAN Director 2/128 and 4/256 SAN Director: Enter the following
command:
switch:admin> portdisable slotnumber/portnumber
slotnumber
where
is the port number of the port you want to disable.
portnumber
and are the slot and port numbers of the port you want to disable.
"Activating ports on
Fabric OS 5.3.0 administrator guide
demand"
47