Table of Contents
Advertisement
Altos R5250 Installation Configuration Guide
Click on OK. You will see the supported devices listed.
4.
Select "LSI Logic MegaRAID SAS 8208ELP and 8204ELP (A:\MegaSR.INF)"
5.
and click on Next.
After the driver is loaded and returned to "Where do you want to install
6.
Windows?" page, click on Next to continue the installation.
Follow the instructions to finish the installation.
7.
Chipset Driver Installation
The chipset driver installation is the same as SAS daughter board installed.
Please refer to the Windows Vista Enterprise Edition Installation (SAS Daughter
Board) Chipset Driver Installation section.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver is included in the chipset driver package. The
Gigabit Ethernet driver would be installed automatically when you installing
the chipset driver package.
RAID Utility Installation
The MegaRAID Storage Manager installation for SAS RAID daughter board is
the same as SAS daughter board installed. Please refer to the Windows Vista
Enterprise Edition Installation (SAS Daughter Board) RAID Utility Installation
section.
Windows Vista Enterprise Edition Installation (with onboard
SATA RAID)
Below information describes how to manually install Windows Vista Enterprise
Edition on Altos R5250 with onboard SATA RAID.
Drivers Required
For Windows Vista Installation, the following device drivers are required.
Device
Onboard SATA
RAID
Onboard NVIDIA
NFP3600 Chipset
Onboard NVIDIA
nForce Networking
Controller
Onboard XGI Z9s
ATI FireGL V5200
Software Required
The management utility for onboard SATA RAID can be found in the EasyBUILD
62
Version
Directory on EasyBUILD
5.10.2600.955
\Disk\r5250\onboard\sataraid\vista\
Package 1502
\Disk\R5250\onboard\Chipset\vista\
65.7.4.0
Including in chipset driver package
1502
6.14.10.0900
\Disk\r5250\onboard\xgiz9s\vista\
8.362.0.0
\Disk\R5250\graphic\V5200\vista\
Advertisement
Table of Contents
