Table of Contents
Advertisement
Altos R5250 Installation Configuration Guide
VGA Driver Installation (ATI FireGL V5600)
Please refer to the Windows Server 2008 Enterprise x64 Edition (SAS Daughter
Board) ATI FireGL v5600 Driver Installation section.
RAID Utility Installation
Please refer to the Windows Server 2008 Enterprise x64 Edition (SAS Daughter
Board) RAID Utility Installation section.
Network Utility Installation
The ForceWare Network Access Manager is included in the chipset driver
package. The ForceWare Network Access Manager will be installed
automatically when you installing the chipset driver package.
Windows Server 2008 Enterprise Edition Installation (SAS
Daughter Board)
Below information describes how to manually install Windows Server 2008
Enterprise Edition on Altos R5250 with SAS daughter board.
BIOS Required
Altos R5250 BIOS
(or later) is required to support Windows Server 2008.
P06
Drivers Required
For Windows Server 2008 Installation, the following device drivers are required.
Device
SAS Daughter
Board
Chipset
Onboard Gigabit
Ethernet
Onboard VGA
ATI FireGL V5600
Software Required
The management utility for SAS daughter board and NIC can be found in the
EasyBUILD 8.0 build 200 (or later).
Software
MegaRAID Storage
Manager
ForceWare Network
Access Manager
Configuring SAS Daughter Board
Please refer to the Appendix B. for the SAS daughter board configuration.
18
Version
1.26.05.00
EasyBUILD 8.0 build 200 (or later)
Package 9.26
EasyBUILD 8.0 build 200 (or later)
67.80.0.0
EasyBUILD 8.0 build 200 (or later)
6.14.10.1090
EasyBUILD 8.0 build 200 (or later)
8.440.0.0
EasyBUILD 8.0 build 200 (or later)
Version
Directory on EasyBUILD
2.63
EasyBUILD 8.0 build 200 (or later)
67.80.0.0
EasyBUILD 8.0 build 200 (or later)
EasyBUILD Version
Advertisement
Table of Contents
