Gigabit Ethernet Driver Installation; Vga Driver Installation (Onboard Xgi Z9S); Vga Driver Installation (Ati Firegl V5200); Raid Utility Installation - Acer R5250-Q2000 - Altos - 2 GB RAM Configuration Manual

Configuration guide
Table of Contents

Advertisement

8.0 build 100 (or later) first before the installation.
Type linux dd when the prompt boot: appears at the start.
2.
Please select the sda as the Driver Disk Source.
3.
Follow the instruction to load the driver for SAS RAID daughter board
4.
from the driver diskette.
When installing MSM (MegaRAID Storage Manager) for SAS RAID
5.
daughter board after installation complted OR if you have installed the
ATI FireGL V5200 in the system, you are required to manually to
select/install additional package at the Package Installation Defaults.
At the Package Installation Defaults, select Customize software packages
6.
to be installed and click Next.
At the Package Group Selection step, hold the shift key to select all the
7.
listed packages in the right pane under Development, and right click on
all the items you just selected and then click "Select all optional
packages".
After selecting the entire package under Development, click Next to
8.
follow the normal procedure to finish the installation.

Gigabit Ethernet Driver Installation

The Gigabit Ethernet driver installation is the same as SAS daughter board
installed. Please refer to the Red Hat Enterprise Linux 5.0 EM64T Installation
(SAS Daughter Board) Gigabit Ethernet Driver Installation section.

VGA Driver Installation (onboard XGI Z9s)

The XGI Z9s driver installation is the same as SAS daughter board installed.
Please refer to the Red Hat Enterprise Linux 5.0 EM64T Installation (SAS
Daughter Board) XGI Z9s Driver Installation section.

VGA Driver Installation (ATI FireGL V5200)

TBD

RAID Utility Installation

You can find the MegaRAID Storage Manager for SAS RAID daughter
1.
board in EasyBUILD 8.0 build 100. Please refer to Directory on EasyBUILD
in Software Required section for the utility and copy it from the
EasyBUILD 8.0 build 100 to HDD first.
# mount /media/cdrom
# cp –R /media/cdrom/app/r5250/raid/lsi1068/Linux/. /tmp
Install MegaRAID Storage Manager
2.
# cd /tmp/
81
Altos R5250 Installation Configuration Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Altos r5250

Table of Contents