Altos R5250 Installation Configuration Guide
Installation Tips
As Windows Server 2003 can't recognize the SAS daughter board, you
1.
need to make a driver diskette from the EasyBUILD 8.0 build 100 first
before the installation.
Press F6 at the start of installation to provide the driver disk for the SAS
2.
daughter board.
Select "LSI Fusion-MPT SAS Driver (Server 2003 32-bit)" as target driver
3.
After loading the RAID driver from diskette, follow the normal procedure
4.
to finish the installation.
Chipset Driver Installation
After the installation completes, you would see the following devices
1.
with yellow mark in Device Manager.
Please insert the EasyBUILD 8.0 build 100 into the optical drive
2.
Expand Drivers -> Altos R5250 -> Chipset, select Windows Server 2003
3.
and click on Setup.
Follow the instruction and use the default setting to install all of the
4.
drivers and utilities in the driver package.
After all drivers and utilities are installed, please reboot the system.
5.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver is included in the chipset driver package. The
Gigabit Ethernet driver will be installed automatically when you installing the
38