Table of Contents
Advertisement
Installation Tips
Though Windows Server can recognize the SAS daughter board controller,
1.
we still need to replace the driver with the one in EasyBUILD. Please make
the driver diskette from the EasyBUILD 8.0 build 200 first before the
installation.
Please boot the system form the Windows Server 2008 CD/DVD. Follow
2.
the instructions to do the installation.
When you see the "Where do you want to install Windows?" on the
3.
screen, please insert the driver diskette and click on Load Driver.
Click on OK. You will see the supported devices listed.
4.
Select "LSI Adapter,SAS 3000 series, 8-port with 1068E - StorPort
5.
(A:\lsi_sas.inf)" and click on Next.
Please hold the ctrl key to select all of listed driver and click on Next to
6.
load the driver.
After the driver is loaded and returned to "Where do you want to install
7.
Windows?" page, click on Next to continue the installation.
Follow the instructions to finish the installation.
8.
Chipset Driver Package Installation
Though Windows Server 2008 has built-in driver for onboard chipset and
1.
can recognize the onboard gigabit Ethernet controller, we still need to
replace the driver with the one in EasyBUILD.
After the installation completes, you would see the following devices in
2.
Device Manager without any yellow mark.
19
Altos R5250 Installation Configuration Guide
Advertisement
Table of Contents
