Table of Contents
Advertisement
Please insert the EasyBUILD 8.0 build 100 (or later) into the optical drive
2.
Expand Drivers -> Altos R5250 -> Chipset and double-click on Windows
3.
2000.
Follow the instruction and use the default setting to install all of the
4.
drivers and utilities in the driver package.
After all drivers and utilities are installed, please reboot the system.
5.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver is included in the chipset driver package. The
Gigabit Ethernet driver would be installed automatically when you installing
the chipset driver package.
VGA Driver Installation (onboard ZGI Z9s)
Windows 2000 cannot recognize the onboard VGA. You can find the XGI
1.
Z9s driver in EasyBUILD 8.0 build 100. Please insert the EasyBUILD 8.0
build 100 into the optical drive.
Expand Drivers -> Altos R5250 -> Graphics adapters -> XGI Z9s, select
2.
Windows 2000 and click on Setup.
Follow the instruction to install the VGA driver.
3.
Please reboot the server after the driver is installed.
4.
After the system rebooted, you would see XGI Z7/Z9/Z9s/Z11 v1.09.03
5.
listed in Display adapters in Device Manager.
VGA Driver Installation (ATI FireGL V5200)
NOTE. With ATI FireGL V5200 installed, you need to disable onboard VGA
controller first from BIOS before you install the ATI FireGL V5200 driver,
47
Altos R5250 Installation Configuration Guide
Advertisement
Table of Contents
