Table of Contents
Advertisement
Controller
Onboard XGI Z9s
ATI FireGL V5200
Software Required
The management utility for SAS RAID daughter board can be found in the
EasyBUILD 8.0 build 100 (or later).
Software
MegaRAID Storage
Manager
Configuring SAS RAID Daughter Board
Please refer to the Appendix C. for the SAS Daughter Board Configuration.
Installation Tips
Though Windows Vista x64 can recognize the SAS RAID daughter board
1.
controller, we still replace the driver with the one in EasyBUILD. Please
make the driver diskette from the EasyBUILD 8.0 build 100 first before the
installation.
Please boot the system form the Windows Vista x64 CD/DVD. Follow the
2.
instructions to do the installation.
When you see the "Where do you want to install Windows?" on the
3.
screen, please insert the driver diskette and click on Load Driver.
Click on OK. You will see the supported devices listed.
4.
Select "LSI Logic MegaRAID SAS 8208ELP and 8204ELP (A:\MegaSR.INF)"
5.
and click on Next.
After the driver is loaded and returned to "Where do you want to install
6.
Windows?" page, click on Next to continue the installation.
Follow the instructions to finish the installation.
7.
Chipset Driver Installation
The chipset driver installation is the same as SAS daughter board installed.
Please refer to the Windows Vista Enterprise x64 Edition Installation (SAS
Daughter Board) Chipset Driver Installation section.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver is included in the chipset driver package. The
Gigabit Ethernet driver would be installed automatically when you installing
the chipset driver package.
RAID Utility Installation
The MegaRAID Storage Manager installation for SAS RAID daughter board is
57
6.14.10.900
\Disk\r5250\onboard\xgiz9s\x64\vista\
8.362.0.0
\Disk\R5250\graphic\V5200\x64\vista\
Version
Directory on EasyBUILD
2.30
\app\r5250\raid\lsi1068\Windows\
Altos R5250 Installation Configuration Guide
Advertisement
Table of Contents
