Gigabit Ethernet Driver Installation; Vga Driver Installation (Onboard Xgi Z9S); Vga Driver Installation (Ati Firegl V5200); Raid Utility Installation - Acer R5250-Q2000 - Altos - 2 GB RAM Configuration Manual

Configuration guide
Table of Contents

Advertisement

from the driver diskette.
When installing MSM (MegaRAID Storage Manager) for SAS RAID
5.
daughter board after installation complted OR if you have installed the
ATI FireGL V5200 in the system, you are required to manually to
select/install additional package at the Package Installation Defaults.
At the Package Installation Defaults, select Customize software packages
6.
to be installed and click Next.
At the Package Group Selection step, hold the shift key to select all the
7.
listed packages in the right pane under Development, and right click on
all the items you just selected and then click "Select all optional
packages".
After selecting the entire package under Development, click Next to
8.
follow the normal procedure to finish the installation.

Gigabit Ethernet Driver Installation

The Gigabit Ethernet driver installation is the same as SAS daughter board
installed. Please refer to the Red Hat Enterprise Linux 5.0 Installation (SAS
Daughter Board) Gigabit Ethernet Driver Installation section.

VGA Driver Installation (onboard XGI Z9s)

The XGI Z9s driver installation is the same as SAS daughter board installed.
Please refer to the Red Hat Enterprise Linux 5.0 Installation (SAS Daughter
Board) XGI Z9s Driver Installation section.

VGA Driver Installation (ATI FireGL V5200)

TBD

RAID Utility Installation

The MegaRAID Storage Manager for SAS RAID daughter board installation is
the same as SAS daughter board installed. Please refer to the Red Hat
Enterprise Linux 5.0 Installation (SAS Daughter Board) RAID Utility Installation
section.
Red Hat Enterprise Linux 5.0 Installation (with onboard SATA
RAID)
Below information describes how to manually install Red Hat Enterprise Linux
5.0 on Altos R5250 with onboard SATA RAID.

Drivers Required

For Red Hat Enterprise Linux 5.0 Installation, the following device drivers are
required.
Device
Onboard SATA
89
Version
Directory on EasyBUILD
9.44
EB8\Disk\r5250\onboard\sataraid\rhel5
Altos R5250 Installation Configuration Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Altos r5250

Table of Contents