Table of Contents
Advertisement
VGA Driver Installation (onboard XGI Z9s)
The XGI Z9s driver installation is the same as SAS daughter board installed.
Please refer to the Red Hat Enterprise Linux 5.0 EM64T Installation (SAS
Daughter Board) XGI Z9s Driver Installation section.
VGA Driver Installation (ATI FireGL V5200)
TBD
RAID Utility Installation
NOTE. You need the firefox to use the onboard SATA RAID utility. You need to
select the Graphic Internet to install during the OS installation or you need to
install the Firefox manually.
You can find the onboard SATA RIAD utility in EasyBUILD 8.0 build 100.
1.
Please refer to Directory on EasyBUILD in Software Required section for
the utility and copy it from the EasyBUILD 8.0 build 100 to HDD first.
# mount /media/cdrom
# cp –R /media/cdrom/app/R5250/onboard/sataraid/Linux/rhel5/
/NvRaid-UI-9-44.i686.rpm /tmp
Install onboard SATA RAID utility
2.
# cd /tmp/
# rpm –ivh NvRaid-UI-9-44.i686.rpm
To start onboard SATA RAID utility, please double-click on nvRaid icon on
3.
the desktop.
Red Hat Enterprise Linux 5.0 Installation (with LSI MegaRAID
SAS 8204ELP)
Below information describes how to manually install Red Hat Enterprise Linux
5.0 on Altos R5250 with LSI MegaRAID SAS 8204ELP.
Drivers Required
For Red Hat Enterprise Linux 5.0 Installation, the following device drivers are
required.
Device
LSI MegaRAID SAS
8704ELP
Onboard NVIDIA
NFP3600 Chipset
Onboard NVIDIA
nForce Networking
Controller
Onboard XGI Z9s
91
Version
Directory on EasyBUILD
09.25.1029.20
\Disk\R5250\sas\8204elp\rhel5\
07
N/A
OS built-in
0.62
\Disk\R5250\nic\Nvidia\rhel5\
1.12.03
\Disk\R5250\onboard\xgiz9s\rhel5\
Altos R5250 Installation Configuration Guide
Advertisement
Table of Contents
