Table of Contents
Advertisement
Follow the instruction to load the driver for onboard SATA RAID from the
4.
driver diskette.
At the Package Installation Defaults, select Customize software packages
5.
to be installed.
At the Package Group Selection step, select Graphic Internet under
6.
Applications.
If you have installed the ATI FireGL V5200 in the system, please also select
7.
Development Tools and under Development. If you don't have ATI FireGL
V5200, please go to next step directly
After adding the additional packages, follow the normal procedure to
8.
finish the installation.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver installation is the same as SAS daughter board
installed. Please refer to the Red Hat Enterprise Linux 5.0 EM64T Installation
(SAS Daughter Board) Gigabit Ethernet Driver Installation section.
VGA Driver Installation (onboard XGI Z9s)
The XGI Z9s driver installation is the same as SAS daughter board installed.
Please refer to the Red Hat Enterprise Linux 5.0 EM64T Installation (SAS
Daughter Board) XGI Z9s Driver Installation section.
VGA Driver Installation (ATI FireGL V5200)
TBD
RAID Utility Installation
NOTE. You need the firefox to use the onboard SATA RAID utility. You need to
select the Graphic Internet to install during the OS installation or you need to
install the Firefox manually.
You can find the onboard SATA RIAD utility in EasyBUILD 8.0 build 100.
1.
Please refer to Directory on EasyBUILD in Software Required section for
the utility and copy it from the EasyBUILD 8.0 build 100 to HDD first.
# mount /media/cdrom
# cp –R /media/cdrom/app/R5250/onboard/sataraid/Linux/x64/rhel5/
NvRaid-UI-9-44.x86_64.rpm /tmp
Install onboard SATA RAID utility
2.
# cd /tmp/
# rpm –ivh NvRaid-UI-9-44.x86_64.rpm
To start onboard SATA RAID utility, please double-click on nvRaid icon on
3.
the desktop.
83
Altos R5250 Installation Configuration Guide
Advertisement
Table of Contents
