Table of Contents
Advertisement
to be installed and click Next.
At the Package Group Selection step, hold the shift key to select all the
7.
listed packages in the right pane under Development, and right click on
all the items you just selected and then click "Select all optional
packages".
After selecting the entire package under Development, click Next to
8.
follow the normal procedure to finish the installation.
Gigabit Ethernet Driver Installation
1.
You can find the onboard NVIDIA nForce Networking Controller driver in
EasyBUILD 8.0 build 100. Please refer to Directory on EasyBUILD in Driver
Required section and copy the driver from the EasyBUILD 8.0 build 100 to
HDD first.
# mount /media/cdrom
# cp /media/cdrom/Disk/R5250/nicNvidia/x64rhel5/
0.62-1.24.i686.rpm
2.
Install the driver
# cd /tmp/
# rpm –ivh nvlan-rhel5-0.62-1.24.i686.rpm
VGA Driver Installation (onboard XGI Z9s)
You can find the onboard XGI Z9s VGA driver in EasyBUILD 8.0 build 100.
1.
Please refer to Directory on EasyBUILD in Driver Required section and
copy the driver from the EasyBUILD 8.0 build 100 to HDD first.
# mount /media/cdrom
# cp /media/cdrom/Disk/
xgi_xg27_x86_xorg7_1_12_03.run /tmp
Install the driver
2.
# cd /tmp/
# ./xgi_xg27_x86_xorg7_1_12_03.run
VGA Driver Installation (onboard ATI FrireGL V5200)
TBD
RAID Utility Installation
You can find the MegaRAID Storage Manager for SAS daughter board in
1.
EasyBUILD 8.0 build 100. Please refer to Directory on EasyBUILD in
Software Required section for the utility and copy it from the EasyBUILD
8.0 build 100 to HDD first.
# mount /media/cdrom
79
/tmp
R5250/onboard/xgiz9s/x64/rhel5
Altos R5250 Installation Configuration Guide
nvlan-rhel5-
/
Advertisement
Table of Contents
