Table of Contents
Advertisement
in the EasyBUILD 8.0 build 200 (or later).
Software
MegaRAID Storage
Manager
ForceWare Network
Access Manager
Configuring LSI MegaRAID SAS 8708ELP
Please refer to the Appendix E. for the LSI MegaRAID SAS 8708ELP
configuration.
Installation Tips
Though Windows Server can recognize the LSI MegaRAID SAS 8708ELP,
1.
we still need to replace the driver with the one in EasyBUILD. Please make
the driver diskette from the EasyBUILD 8.0 build 200 first before the
installation.
Please boot the system form the Windows Server 2008 x64 CD/DVD.
2.
Follow the instructions to do the installation.
When you see the "Where do you want to install Windows?" on the
3.
screen, please insert the driver diskette and click on Load Driver.
Click on OK. You will see the supported devices listed.
4.
Select "LSI Logic MegaRAID SAS 8708ELP RAID Controller
5.
(A:\oemsetup.inf)" and click on Next.
Please hold the ctrl key to select all of listed driver and click on Next to
6.
load the driver.
After the driver is loaded and returned to "Where do you want to install
7.
Windows?" page, click on Next to continue the installation.
Follow the instructions to finish the installation.
8.
Chipset Driver Installation
Please refer to the Windows Server 2008 Enterprise x64 Edition (SAS Daughter
Board) Chipset Driver Installation section.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver is included in the chipset driver package. The
Gigabit Ethernet driver would be installed automatically when you installing
the chipset driver package.
VGA Driver Installation (onboard VGA)
Please refer to the Windows Server 2008 Enterprise x64 Edition (SAS Daughter
Board) XGI Z9x Driver Installation section.
17
Version
Directory on EasyBUILD
2.63
EasyBUILD 8.0 build 200 (or later)
67.80
EasyBUILD 8.0 build 200 (or later)
Altos R5250 Installation Configuration Guide
Advertisement
Table of Contents
