Table of Contents
Advertisement
Altos R5250 Installation Configuration Guide
Press F2 during the POST to enter the BIOS. After you entering the BIOS,
1.
select Advanced -> PCI Configuration -> Onboard VGA Control, press
Enter and change the setting from Enabled to Disabled press. And then
press F10 to save configuration changes and reboot system.
After you reboot and entering the OS, you will see one Standard VGA
2.
Graphics Adapter and one Video Controller under Other Device in
Windows Server 2000 Device Manager for ATI FireGL V5200.
You can find the ATI FireGL V5200 driver in EasyBUILD 8.0 build 100.
3.
Please insert the EasyBUILD 8.0 build 100 into the optical drive.
Expand Drivers -> Altos R5250 -> Graphics adapters -> ATI FireGL V5200,
4.
select Windows XP x64 and click on Setup.
Follow the instruction to install the VGA driver.
5.
At Select Components, please click on Express.
6.
Please reboot the server after the driver is installed. You would see ATI
7.
FireGL V5200 and ATI FireGL V5200 Secondary listed in Display adapters in
Device Manager.
After the system rebooted, if you see the following message on the
8.
screen.
48
Advertisement
Table of Contents
