Viewing Rogue Access Points Managed By The Wireless Controller - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
To see details about a client, select its corresponding radio button in the Select column of the
Client table, and then click the Details button to display the Client Details screen. Because
this screen is identical to the Client Details screen that you can access from the Network
Clients screen, see
screen is shown in
Viewing Rogue Access Points Managed by the Wireless
Controller
Figure 96.
The Controller Rogue AP screen lets you monitor all rogue access points that were detected by
the wireless controller.
Table 44 explains the fields of the Rogue AP table on the Controller Rogue AP screen.
Table 44. Controller Rogue AP Information
Setting
Select
MAC
SSID
Channel
Privacy
Last Beacon
Table 41 on page 132 for information about the fields. The Client Details
Figure 90 on page 132.
Description
The radio button that lets you select the rogue access point to locate it on a floor
map.
The MAC address of the rogue access point.
The wireless network SSID that the rogue access point is using.
The channel that the rogue access point is using.
The security of the rogue access point (Secured or Unsecured).
The last beacon that the rogue access point transmitted.
Chapter 11: Monitoring the Wireless Network and Components | 138