Configuring Alarm Notification Settings - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
To configure Syslog settings:
1. Select Configuration > System > Alerts > Syslog. The Syslog Settings screen
displays:
Figure 32.
2. Configure the settings as explained in
3. Click Apply to save your settings.
Table 13. Syslog Settings
Field
Enable Syslog
Syslog Server IP Address Enter the IP address to which the wireless controller and managed access points will
Server Port Number

Configuring Alarm Notification Settings

You can classify some events as major or minor. For example, in the RF Management
screen, you can specify whether a coverage hole should be classified as critical or major (see
Basic RF Management
Table 13, Syslog
Description
Enable the syslog settings, if you have a syslog server on your network.
send all syslogs, if the Syslog option is enabled.
Enter the number of the port at which your syslog server is configured to listen to
requests.
on page 76).
Settings.
Chapter 5: Configuring Network Settings | 62