Configuring The Email Notification Server - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
To configure alarm actions:
1. Select Configuration > System > Alerts > Alarms. The Alarm Actions screen displays:
Figure 33.
2. Specify which alarm severity should be included in the Syslog. Select Minor, Normal, Major,
or Critical.
3. Click Apply to save your settings.

Configuring the Email Notification Server

The email notification server is the location from which the email alerts originate.
To configure email settings:
1. Select Configuration > System > Alerts > Email. The Email Configuration screen
displays:
Figure 34.
2. Configure the settings as explained in
3. Click Apply to save your settings.
Table 14, Email Configuration
Chapter 5: Configuring Network Settings
on page 64.
| 63