Monitoring The Wireless Controller - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
Table 42 explains the fields of the Profiles table on the Network Profiles screen.
Table 42. Network Security Profiles Information
Setting
SSID
Security
Radio Mode
Status
Controller IP
Group Name

Monitoring the Wireless Controller

To monitor a specific wireless controller, log into its Web management interface, and use the
Monitor Controller screens described in this section.
Note: If you stack wireless controllers, you can view similar information
about the stack by using the network monitor screens (see
Monitoring the Network
To monitor the wireless controller:
1. Select Monitor > Controller.
2. Select one of the following submenu links to display a wireless controller monitoring screen:
• Summary. See
• Usage. See
• Access Points. See
page 137.
• Clients. See
• Rogue AP. See
• Profiles. See
page 139.
• DHCP Lease. See
page 140.
• Captive Portal Users. See
Controller on page 141.
Description
The wireless network SSID for the security profile.
The security mode (Open, WEP, WPA, WPA2, or WPA/WPA2) for the security
profile.
The wireless mode for the security profile (802.11b/bg/ng or 802.11a/na).
The status of the security profile (Active or Inactive).
The IP address of the wireless controller on which the security profile is configured.
The name of the group of which the security profile is a member.
on page 124).
Viewing the Wireless Controller Summary Screens
Viewing Wireless Controller Usage
Viewing Access Points Managed by the Wireless Controller
Viewing Clients Managed by the Wireless Controller
Viewing Clients Managed by the Wireless Controller
Viewing Security Profiles Managed by the Wireless Controller
Viewing DHCP Leases Provided by the Wireless Controller
Viewing Captive Portal Users Managed by the Wireless
Chapter 11: Monitoring the Wireless Network and Components
on page 135.
on page 136.
on page 137.
on page 137.
on
on
on
| 134