Editing Access Point Information - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
The Managed AP List shows the following entries for each access point that you added to
the list.
Table 6. Managed AP List Fields
Field
IP
MAC
Model
Name
Status
Group Name

Editing Access Point Information

1. Select Access Point > Managed AP List to view the Managed AP List:
Figure 24.
2. Select the access point that you want to edit by selecting its radio button in the Edit column
of the Managed AP List.
3. Click Edit. The Edit Access Point screen displays (see
Description
The IP address of the access point.
The MAC address of the access point.
The model of the access point.
The name of the access point.
•
Authentication in progress
•
Applying configurations
•
Firmware upgrade
•
AP is rebooting
•
Connecting
•
Connected
•
Not connected
The default group is basic.
Chapter 4: Access Point Discovery and Management
Figure 25).
| 51